ASTM A106 Seamless carbon steel tube for high temperature service

ASTM A106 / A106M - 11 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
Description:
1.standards: ASTM A106 (ASME SA106)


2.products mainly used: apply to bending, curling and similar forming process.
3.the main products of steel / steel grade: Gr.A; Gr.B; Gr.C.
4.Specifications: diameter: 10.3 to 114.3 mm thickness: 0.8 to 12 mm Length: 6 m above, and, in accordance with customer demand, supply and other specifications of steel pipe.
5.Chemical composition and mechanical properties
6.JIS Number and Corrensponding Foreign Standards


Scope:1. This specification covers seamless carbon steel pipe for high-temperature service (Note 1) in NPS 1/8 to NPS 48 inclusive, with nominal (average) wall thickness as given is ANSI B36.10. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification. Pipe ordered under this specification shall be suitable for bending, flanging, and similar forming operations, and for welding. When the steel is to be welded, it is presupposed that a welding procedure suitable to the grade of steel and intended use or service will be utilized (Note 2).


NOTE 1 Α Consideration should be given to possible graphitization of the material at the higer temperatures at which it may be used.
NOTE 2 Α Grades A rather than Grades B or Grades C pipe should be used for close coiling, or cold bending. The purpose for which the pipe is to be used should be stated in the order. This note is not intended to prohibit the cold bending of Grades B seamless pipe.
2. Supplementary requirements (S1 to S4) of an optional nature are provided for seamless pipe intended for use in applications where a superior grade of pipe is required. These supplementary requirements call for additional tests to be made and when desired shall be so stated in the order.
3. When these products are to be used in applications conforming to ISO Recommendations for Boiler Construction, the requirements of Specification A 520 (Mechanical Property Requirements Section) shall supplement and supersede the requirements of this specification. 1.4 The values stated in inch-pound units are to be regarded as the standard.
NOTE 3 Α The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as "nominal diameter", "size", and "nominal size".
5. The following precautionary caveat pertains only to the test method portion, Sections 11, 12, 13, 14, and 15, of this specification; This standard does not purport to address all of the safety problem, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


Carbon Steel Pipe Features Specifications
O.D.(mm) Wall Thickness Unit(mm)
22.533.544.5566.5-77.5-88.5-99.5-101112
Φ25-Φ28        
Φ32        
Φ34-Φ36        
Φ38        
Φ40         
Φ42         
Φ45        
Φ48-Φ60       
Φ63.5       
Φ68-Φ73        
Φ76    
Φ80    
Φ83    
Φ89    
Φ95    
Φ102    
Φ108    
Φ114     
Φ121     
Φ127     
Φ133     
Φ140      
Φ146      
Φ152      
Φ159      
Φ168      

Grade and Chemical Composition (%)
GradeC≤MnP≤S≤Si≥Cr≤Cu≤Mo≤Ni≤V≤
A0.250.27-0.930.0350.0350.100.400.400.150.400.08
B0.300.29-1.060.0350.0350.100.400.400.150.400.08
C0.350.29-1.060.0350.0350.100.400.400.150.400.08

Mechanical Properties
GradeRm Mpa Tensile StrengthYield Point (Mpa)ElongationDelivery Condition
A≥330
≥205
20Annealed
B≥415≥24020Annealed
C≥485≥27520Annealed

Dimension Tolerances
Pipe TypePipe SizesTolerances
Cold DrawnOD≤48.3mm±0.40mm
≥60.3mm±1%mm
WT±12.5%

JIS Number and Corrensponding Foreign Standards
JIS
ASTM
BS
DIN
NF
ISO
Index Number
Std.No
Grade
Type
Std.No
Grade
Type
Std.No
Grade
Type
Std.No
Grade
Type
Std.No
Grade
Type
Std.No
Grade
Type
G3456
STPT370
(STPT38)
C
A106
GrA
C
3602
HFS360
C
17175
St35.8
C
A49-211
TU37b
C
2604/2
TS5
C
C004
"
CFS360
C
17177
St37.8
C
A49-213
TU37c
C
2604/3
TW9H
C
"
ERW360
C
A49-243
TU37c
C
"
CEW360
C
STPT410
(STPT42)

C
A106
GrB
C
3602
HFS410
C
17175
St45.8
C
A49-211
TU42b
C
2604/2
TS9H
C
"
CFS410
C
17177
St42.8
C
A49-213
TU42c
C
"
ERW410
C
A49-243
TU42c
C
"
CEEW410
C
STPT480
(STPT42)
C
A106
GrC
C
3602
HFS460
C
A49-211
TU48b
C
2604/2
TS14
C
"
CFS460
C
A49-213
TU48c
C
"
ERW460
C
"
CEEW460
C

Get in Touch

Welcome to Sunny Steel Enterprise Ltd.

Sunny Steel provide a wide range of steel products as Steel pipes, Seamless tube and seamless pipes, Alloy pipes, Pipe fittings, Composite steel pipe used in the industry, construction etc.
You can get in touch by telephone, post, online or E-mail.
Please check the help section first to see if your question may be answered there.

Pipe fitting

Pipe fitting
Pipe fitting is work that involves the installation or repair of pipes or tubes. Pipes and tubes are necessary for a wide range of reasons.

Flanges General

Flanges General
A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system.

Seamless steel pipe >>

Seamless steel pipe >>
Seamless steel pipe is alos called CDS pipes (Cold drawn seamless pipe).